DOWNLOAD TECNO SPARK 2 KA7O FACTORY SIGNED FIRWMARE
Tecno Spark 2 Quick Review
Tecno Spark 2 runs on Android 8.1 Oreo themed with HiOS 3.3. This device is a 6-inch ips touchscreen display with a resolution of 720 X 1440 pixels 293ppi. A size of 159.4 x 76.2 x 7.8 mm and weighs about 145g.
Powered by 1.5GHz quad-core processor MediaTek MT6580WP with 1GB / 2GB of RAM. There’s also 16GB of internal storage which can be expanded up to 128GB with microSD.
There is a 13 MP + 2MP primary camera with LED Flash and a 8-mega pixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+WCDMA+4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 3500Mah non-removable battery
DOWNLOAD ROM ^(https://www.appmarsh.com/link/https://www.mediafire.com/file/ethtkd3xc1k25ke/KA7O-H8024DEFGH-O-181012V157_Repairmymobile.zip)
How to flash this device using SP Flash Tool
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can’t power on, can’t charge and will not be detected by a computer)
Download, MTK VCOM USB drivers from here ^(https://www.appmarsh.com/link/http://appmarsh.com/1QJjUA) Download and extract Tecno flashtool from here ^(https://www.appmarsh.com/link/http://zipansion.com/1MHku)
Launch SWD_AfterSales inside the extracted folder
Click on settings icon Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash Select either Firmware Upgrade or Format + Download from drop down menu. Click Confirm Button. Now turn off and connect your device to PC. Wait for flashing process to complete. Reboot device NOTE If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink ^(https://www.appmarsh.com/link/http://www.appmarsh.com/2018/12/how-to-flashunbrick-or-upgrade-mediatek.html), SP Multiport Download ^(https://www.appmarsh.com/link/http://www.appmarsh.com/2018/11/how-to-flashunbrick-mtk-smart-phones.html), Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here ^(https://www.appmarsh.com/link/http://appmarsh.blogspot.com/2018/09/common-errors-on-sp-flash-tool-and-some.html) and see if it solves your problem
Report if you cannot download any of these files.
Like and share
facebook.com/appmarsh Subscribe to my Channel Youtube.com/c/AmparasTking ^(https://www.appmarsh.com/link/http://youtube.com/c/AmparasTking)
Donate to support this site
Marshmallow Android is BT Ireland’s Head of Sales for Republic of Ireland domestic multi-site companies, indigenous MNCs and public sector accounts. He is responsible for the direction and control of all sales activity in the region. He has over 10 years management experience from high growth start-ups to more established businesses. He’s led teams in Ireland, India and China across various industries (ICT, On-Line Recruitment, Corporate Training and International Education). View all posts by Marshmallow