G-Vill Q10 firmware/stock rom to unbrick your phone

Hello,

This firmware is G-Vill Q10 firmware. This can be a generic android tool. The firmware is already examined 🙂 However make sure you again up the firmware 🙂




All footage under are simply an instance. 


You’ll be able to repair the next factor for your telephone:
1. Bootloop
2. Broken Device UI
3. TP Improve simplest
4. Lifeless telephone however it’s detected in pc
5. Take away Gmail Account / Password / Development Lock (Choice Approach)
6. Privateness Coverage Password Lock up
7. Monkey Virus/Malware 


“DOWNLOAD THESE FILES”
Firmware Right here –>Firmware Obtain Hyperlink
VCOM Driving force –>VCOM Handbook

Choice Driving force –> AutoInstaller
SPFlashTool – Newest Model


“Use WinRar or 7zip to extract the firmware”
“Extract the recordsdata for your desired folder”
“In the event you come upon error in flashtool, use other model of it.”
“Uncheck obtain supervisor in Datafilehost”


“I counsel to make use of 32bit Home windows OS for compatibility of the driving force”

“You’ll be able to additionally use 64bit model, simply disable motive force signing or motive force signature ahead of putting in the driving force.”



Putting in Driving force with AutoInstaller


First take a look at the Choice Driving force, which is the AutoInstaller. Simply open the set up.exe then it’ll robotically set up the motive force. To totally test if the driving force is appropriately put in for your pc. 

Apply those steps:

  1. Flip off your telephone (all the time powered off is a will have to)
  2. Press and hang quantity up or down, or you’ll easy press the two button.
  3. Insert your USB cable with out liberating the VOLUME button(s).
  4. For your pc, it will have to locate your telephone and it’ll set up the MTK Preloader or Mediatek USB VCOM motive force.
  5. Repeat 1 to 4 if it does now not locate your telephone.
  6. If MTK Preloader/Mediatek USB VCOM Driving force is put in you might be excellent to move in flashing your telephone ^_^


Reference Video the use of Driving force Auto Installer (watch in HD)


Putting in Manually the use of VCOM Driving force


When putting in it manually your telephone will have to be grew to become off, then attach it for your pc/computer whilst urgent VOLUME UP or VOLUME DOWN. This will locate and search for the driving force.


 1. That is the primary time that you’re going to attach your telephone and it’ll seek for the right kind motive force.

2. Take a look at come with this location … … and click on on browse. Search for USB VCOM Driving force and Click on on 2K_XP_COM folder if you’re the use of Home windows XP or Win7 for Home windows 7 after which press OK when you find yourself finished selecting the proper folder for the driving force.


3. If the driving force is effectively put in MediaTek DA USB VCOM will seem within the New Wizard.


Video Putting in VCOM Driving force (please watch in HD)





“Your Telephone will have to be grew to become off when you find yourself in a position to attach and flash your telephone”


Flashing

1. Release FlashTool (flash_tool.exe)
2. In Flashtool, Click on on Scatter-Loading, and cargo your scatter document. (see instance under)

Reference Video The usage of FlashTool model 5.xxx (watch in HD)




 3. After you load the document, FILL CUSTPACK, MOBILE_INFO, and different document if simplest to be had within the firmware. Forget about if now not to be had. UNCHECK PRELOADER  simplest (By no means flash preloader), If you can’t continue  in flashing with out PRELOADER come with PRELOADER. Continue at your personal chance, press Press Obtain to Flash your Telephone.


4. After you press Obtain Apply those steps

  • Flip off your telephone (all the time powered off is a will have to)
  • Press and HOLD quantity UP or Down or you’ll merely press it concurrently
  • Insert your USB cable with out liberating the VOLUME button(s).
  • Stay on repeating till Flashtool detected your telephone.

5. If effectively detected simply wait till the development bar reaches 100%. In case your telephone didn’t robotically activate after flashing, take away battery and USB cable. And put again your battery then flip for your tool.


“Laborious reset your telephone after flashing”


Some workarounds:
In the event you come upon PMT_Changed error here’s what you do:
In Newest model of Flashtool

  1. PMT_CHANGED error happen when firmware isn’t suitable together with your telephone. Every so often your telephone has a distinct board model. You must test it too, in case your firmware is suitable together with your telephone. 
  2. Check out Firmware improve
  3. Check out other model of flashtool
  4. Attempt to set Structure All + Obtain
  5. Or take a look at Handbook Structure first then Obtain.


In the event you come upon Privateness Coverage Password:


  1. Open flash_tool.exe
  2. Load the scatter document
  3. Goto Structure Tab
  4. Click on on Structure apart from bootloader
  5. Press Play/Get started Icon
  6. Then take away battery
  7. Insert the battery once more
  8. Insert the USB cable (you must listen a beep for your pc, and it must continue in formatting.)
  9. After finished formatting continue in Flashing.
  10. Goto Obtain tab (I suppose that you simply loaded the scatter document already)
  11. Uncheck PRELOADER (this is essential)
  12. Press Obtain
  13. Then take away battery
  14. Insert Battery once more
  15. Insert the USB cable (you must listen a beep for your pc, and it must continue in flashing or downloading the firmware for your telephone.)
  16. Energy ON the telephone after flashing.
  17. Repair your IMEI.

For Invalid IMEI (Does now not paintings in MT6571 SoC):


  1. Root your telephone by the use of vRoot/iRoot/Kingoroot or your most popular approach in rooting you tool. Your telephone will have to be rooted first.
  2. Obtain MTKDroidsTool model 2.4.8 and model 2.5.3
  3. Permit your USB debugging in Developer Possibility (you additionally want this in rooting your telephone by the use of PC)
  4. Ok for your PC — Open MTKDroidstool model 2.4.8 (Mtkdroidstool.exe) first. Just remember to attached your telephone already.
  5. Nonetheless in Mtkdroidstool — Click on ROOT
  6. For your telephone — A pop up discussion will seem, simply grant or permit it.
  7. For your PC — If root shell is granted/allowed, Click on in IMEI/NVRAM tab. Whether it is grayed out that is the time whilst you open the MTKDroidsTool model 2.5.3.
  8. Input your unique IMEI
  9. Click on Exchange
  10. Reboot your telephone



FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your telephone will have to be rooted first)



1. You should definitely have MTKDROIDSTOOL model 2.4.8 or model 2.5.3 (you’ll seek it in google)
2.  In MTKDroidstool (I suppose you release the device) — Click on in Root. 
3. For your tool — http://d-h.st/miIbAfter you press Root, you wish to have to authorize it. A pop up message will seem. Click on Permit/Authorize depends upon your root utility.
4. In MTKDroidsTool — Click on in IMEI/NVRAM, then click on in RESTORE.
5. Then search for the folder the place you extracted the NVRAM recordsdata.
6. Take a look at if the Baseband is fastened. And if the IMEI is absolutely restored.
7. If Baseband continues to be Unknown and IMEI is invalid. Then you wish to have to laborious reset first your telephone.
8. After laborious reset your baseband must be fastened already. (base on my enjoy)
9. In case your baseband is fastened on occasion the IMEI continues to be invalid. So you wish to have to revive the IMEI.
10.  To revive IMEI apply Step 1-4, however you must now not repair. You must fill the IMEI then click on REPLACE. Then reboot your telephone.  VOILA! I am hoping the telephone is absolutely running 🙂

I am hoping this educational let you. Please drop a remark if one thing isn’t transparent to you.

Examined through: ME

Author: Marshmallow

Marshmallow Android is BT Ireland’s Head of Sales for Republic of Ireland domestic multi-site companies, indigenous MNCs and public sector accounts. He is responsible for the direction and control of all sales activity in the region. He has over 10 years management experience from high growth start-ups to more established businesses. He’s led teams in Ireland, India and China across various industries (ICT, On-Line Recruitment, Corporate Training and International Education).

Leave a Reply