Official Firmware for the Vivo Y95 is Now available for Download, In this article You will Learn How to Flash Vivo Y95 using the QPST aka QFIl tools, it’s a Easy Process and You can Do it using The below instructions.
You Can use Firmware file to unbrick Vivo Y95 to fix Software issue and in Development. The Vivo Y95 is Run on Android 8.XX OS Powered by a Qualcomm Processor and it is also a Dual SIM smartphone with Good Software Specs. Follow below Guide to Install Stock ROM on Vivo Y95,
- Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- It will erase all your Personal data including data of Internal storage, so we advise you first to take a complete backup of your phone and then proceed.
- Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
- via adb
- Firmware Vivo Y95 [Password: Firmware27]
The Whole Process Complete In 2 Steps-
- Driver Installation
- Software Upgrade
2- After installation, connect Phone to PC using USB cable.
3- While connecting to PC, phone should be switched off and press volume up & down as boot key.
4- If it makes Qualcomm port, then driver has been successfully installed.
Step: 2- Make sure your device has the Power to support flashing.
Step: 3- Run QFIL tool.Rom Extract folder,
Step: 8- Click on Select Port and choose the port.
Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.
So This Is A Complete Guide to Install stock ROM on Vivo Y95 if you have any question Let Us know Via Comment,