FRP (Factory Reset coverage) is the brand new safety Google added to android lollipop. When you reset the instrument from restoration menu, FRP transfer is tripped which is able to ask the person to enter the Google account that was once up to now used on the instrument. Even although this was once made for safety causes, we every now and then put out of your mind the account main points that was once on the instrument sooner than reset so caught on enter Google account main points.
Normally you’ll bypass this FRP safety on this instrument manually with out the use of a PC the use of emergency mode and a few apk. This manner is ok particularly should you don’t have a PC round.
Remember this instrument has protected boot so you want to use up to date equipment like EFT dongle, NCK dongle, infinity CM2, Miracle Box and many others to bypass this safety.
The manner under will display you the way you’ll do that the use of SP Flash software. Its easy and really rapid and works on all MTK units.
MTK VCOM Drivers
Latest SP Flash Tool
ITEL A15 DA & Scatter File
Installed MTK VCom drivers on your PC
Extract and Launch SP Flash Tool
Extract Itel A15 Scatter & DA File
On the Download-Agent bar, click on make a selection
then navigate to the Itel A15 folder and make a choice MTK_AllInOne_DA.bin file.
On Scatter bar, click on make a selection
make a choice MT6580_Android_scatter.txt file in Itel A15 folder.
Now Click Format tab
Make positive you choose handbook layout flash
Now you’re going to want to edit the choice of Begin Address (HEX) and Format Length (HEX)
Go into Itel A15 folder and open MT6580_Android_scatter.txt with notepad or any textual content editor
Locate FRP partition on the notepad by way of urgent CTRL + F then sort FRP and click on to find subsequent
Copy hex choice of physical_start_addr: 0x1b000000 and paste it Begin Address
Copy hex choice of partition_size: 0x100000 and paste it into Format Length (HEX)
Click the blue get started icon and attach instrument to PC
SP Flash software will locate instrument then layout FRP partition
When you spot inexperienced pop up with tick, the operation is a success.
Disconnect and reboot instrument
Note that instrument will take longer than standard to boot up after this procedure
Hope this is helping
Like and Share
Subscribe to my channel