Exclusive Releases • Ampere v3.19 [Final] [Pro]

Ampere v3.19 [Final] [Pro]
Requirements: 4.0.3+
Overview: Did you ever felt, that one Charger/USB cable set fees your tool in reality rapid and the opposite now not? Now, you’ll be able to turn out this with Ampere.

ImageImageImage

Measure the charging and discharging present of your battery.

PRO options:
– Widgets
– Notification
– Alerts on tool
– Alerts on Android Wear

The app works on Android 4.0.3+ units. Not each and every tool is supported as a result of there are units which lacks an acceptable dimension chip (or the interface) and they may be able to now not be supported in any respect. Please learn the checklist of now not supported telephones on the finish of the outline.

The app isn’t intended to be mA correct. It is handiest excellent for assessment which Charger/USB cable combo is operating the right for you at the identical tool.

Start the app and wait ca. 10 seconds (“measuring” is at the show). After this time, the charging or discharging present will likely be proven.

The present is dependent upon many stuff:
– Charger (USB/AC/Wireless)
– USB cable
– Phone kind
– Current duties operating
– Display brightness
– WiFi state
– GPS state

Please do not use the readings in this app as concrete science. However, the readings are excellent sufficient to quite measure how quite a lot of chargers and USB cables honest at the identical tool.

If the app displays 0mA always, please use the settings choice “Old dimension means”. You can power the app with it to make use of the outdated dimension interface, if the Lollipop tool has no less than one.

Unfortunately some Samsung units do not give right kind (measured) values (e.g.: S5), simply the utmost conceivable charging present with the real USB cable/charger configuration. This is a firmware downside.

Background data: The app measures the charging/discharging present of the battery. If your telephone isn’t hooked up to a charger, you spot the discharging present which is unfavorable. If you attach a charger then the present what the charger offers will likely be used to provide your telephone and the remainder energy will likely be charged into the battery.

If your telephone consumes 300 mA with out a charger hooked up (-300mA at the show), then a 500 mA charger will fee your battery most with 200 mA present (200mA on show).

Technical data: The displayed present is a median price from 50 measurements minus the 10 higher values and the 10 decrease values. The displayed present can also be shaky or volatile and even 0 because of this, that the Android machine supplies volatile values. Every corporate makes use of other battery sorts and different making it tough to get correct effects about your charger.

LiPo batteries do not draw the utmost for the total time it takes to fee the telephone. If your battery is charged virtually complete then the charging present will likely be a lot much less as via decrease battery ranges.

– A graph explaining LiPo fee phases: http://batteryuniversity.com/_img/content material/ion1.jpg ^(https://www.appmarsh.com/link/http://batteryuniversity.com/_img/content/ion1.jpg)
– Dave’s (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk ^(https://www.appmarsh.com/link/http://youtu.be/A6mKd5_-abk)

Phones/ROMS suitable handiest with “Old dimension means” switched on and decided on the fitting “Measurement interface”:
➤ HTC One M7 / M8
➤ LG G3

Phones/ROMS reported to be now not running with this app:
➤ Galaxy Grand Prime – fortuna3gdtv
➤ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 – d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 – degas3g
➤ HTC Desire 510 – htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G – pyramid

Please don’t give unsuitable ranking, in case your telephone is one of the above. Not the app is unsuitable, however your telephone does now not make stronger this sort of dimension but.

If the app does not paintings in your tool with pre-Lollipop Android model, then please learn the primary and the second one posts on this XDA developer discussion board thread: http://goo.gl/pZqJg8 ^(https://www.appmarsh.com/link/http://goo.gl/pZqJg8) . Please put up your downside with screenshots within the XDA thread.

Please learn additionally the FAQ: http://goo.gl/R8XgXX ^(https://www.appmarsh.com/link/http://goo.gl/R8XgXX)

What’s New:
v3.19
* Android Pie unencumber
* Advanced alert settings
* Bug fixes and minor improvements

Mod Info:
Pro options unlocked.

This app has no commercials

More Info:

CODE:

https://play.google.com/retailer/apps/main points?identification=com.gombosdev.ampere

Download Instructions:

Hidden Content
This board calls for you to be registered and logged-in to view hidden content material.

Statistics: Posted via Balatan ^(https://www.appmarsh.com/link/https://appmarsh.com/memberlist.php?mode=viewprofile&u=49) — Sun Jun 16, 2019 7:33 pm


Ampere 3.18 Mod(Pro + Optimized)

Ampere

“Best App to test your Phone charging, adapter and cable quality”

Measure the charging and discharging current of your battery.
Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.
Measure the charging and discharging current of your battery.
PRO features:
– Widgets
– Notification
– Alerts on device
– Alerts on Android Wear
The app works on Android 4.0.3+ devices. Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
—-
Please read also the FAQ: http://goo.gl/R8XgXX ^(https://www.appmarsh.com/link/http://goo.gl/R8XgXX)
—-
Start the app and wait ca. 10 seconds (“measuring” is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
– Charger (USB/AC/Wireless)
– USB cable
– Phone type
– Current tasks running
– Display brightness
– WiFi state
– GPS state
Please don’t use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option “Old measurement method”. You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don’t give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
—-
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
—-
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
—-
LiPo batteries don’t draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
– A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg ^(https://www.appmarsh.com/link/http://batteryuniversity.com/_img/content/ion1.jpg)
– Dave’s (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk ^(https://www.appmarsh.com/link/http://youtu.be/A6mKd5_-abk)
—-
Phones/ROMS compatible only with “Old measurement method” switched on and selected the right “Measurement interface”:
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime – fortuna3gdtv
➤ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 – d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 – degas3g
➤ HTC Desire 510 – htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G – pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn’t work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 ^(https://www.appmarsh.com/link/http://goo.gl/pZqJg8) . Please post your problem with screenshots in the XDA thread.

Please read also the FAQ: http://goo.gl/R8XgXX ^(https://www.appmarsh.com/link/http://goo.gl/R8XgXX)

WHATS NEW-
v3.14
* Android Pie release
* Advanced alert settings

* Bug fixes and minor enhancements


App Info:


App name : Ampere

Package Name : com.gombosdev.ampere

Developer: Braintrapp

Apk Size : 5 MB

Update on Play Store : 27 Jan 2019

Version Name & Code: 3.18

Requirements: 4.0+

MORE INFO ON PLAY STORE: Ampere

★★★ Mo.ds ★★★
P.aid Patched
Mod Optimized + Lite

^(https://www.appmarsh.com/link/https://ouo.io/PjjigR)
============== Note ==============
If You face download issue, or you want latest updates notifications, connect with us on facebook, whatsapp, telegram, youtube.

How to Download ^(https://www.appmarsh.com/link/https://youtu.be/nvF60OqoUPs) | Subscribe ^(https://www.appmarsh.com/link/https://www.rockmods.net/p/contact-us.html?m=1)