Evillimiter – Limits Bandwidth Of Devices On The Same Network

A tool to limit the bandwidth (upload/download) of devices connected to your network without physical or administrative access.
evillimiter employs ARP spoofing ^(https://en.wikipedia.org/wiki/ARP_spoofing) and traffic shaping ^(https://en.wikipedia.org/wiki/Traffic_shaping) to throttle the bandwidth of hosts on the network. This is explained in detail below.
Release page ^(https://github.com/bitbrute/evillimiter/releases).

Type evillimiter or python3 bin/evillimiter to run the tool.
evillimiter will try to resolve required information (network interface, netmask, gateway ^(http://www.kitploit.com/search/label/Gateway) address, …) on its own, automatically.

Command-Line Arguments

-hDisplays help message listing all command-line arguments
-i [Interface Name]Specifies network interface (resolved if not specified)
-g [Gateway Address]Specifies gateway IP address (resolved if not specified)
-n [Netmask Address]Specifies netmask (resolved if not specified)
-fFlushes current iptables ^(http://www.kitploit.com/search/label/Iptables) and tc configuration. Ensures that packets ^(http://www.kitploit.com/search/label/Packets) are dealt with correctly.
--colorlessDisables colored output

evillimiter Commands

scanScans your network for online hosts. One of the first things to do after start.
hostsDisplays all the hosts/devices previously scanned and basic information. Shows ID for each host that is required for interaction.
limit [ID] [Rate]Limits bandwidth of host associated to specified ID. Rate determines the internet speed.
Valid rates: bit, kbit, mbit, gbit, tbit
For example: limit 4 200kbit or limit 2 1gbit
block [ID]Blocks internet connection of host associated to specified ID.
free [ID]Unlimits/Unblocks host associated to specified ID. Removes all further restrictions.
clearClears the terminal window.
?, helpDisplays command information similar to this one.


  • Limits IPv4 connctions only, since ARP spoofing ^(https://en.wikipedia.org/wiki/ARP_spoofing) requires the ARP packet ^(http://www.kitploit.com/search/label/Packet) that is only present on IPv4 networks.

Evil Limiter ^(https://github.com/bitbrute/evillimiter) is provided by bitbrute ^(https://github.com/bitbrute) “as is” and “with all faults”. The provider makes no representations or warranties of any kind concerning the safety, suitability, lack of viruses, inaccuracies, typographical errors, or other harmful components of this software. There are inherent dangers in the use of any software, and you are solely responsible for determining whether Evil Limiter is compatible with your equipment and other software installed on your equipment. You are also solely responsible for the protection ^(http://www.kitploit.com/search/label/Protection) of your equipment and backup of your data, and the provider will not be liable for any damages you may suffer in connection with using, modifying, or distributing t his software.

Download Evillimiter ^(https://github.com/bitbrute/evillimiter)