Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 – MT6771 support and other features Setup Download

Infinity Chinese language Miracle-2 MTK/Mediatek v2.00 r4 – MT6771 fortify and different options

 Infinity Chinese language Miracle-2 MTK/Mediatek v2.00 r4 – MT6771 fortify and different options !
– Primary
Connection degree revised BROM degree fortify optimized
MT6771 CPU supported!
MT6771 moved from TEST to GENERAL fortify.
Firmwware learn Firmware write NVRAM learn NVRAM write
Reset Settings / Structure FS Reset FRP Reset Privateness MemoryTool
– Provider
Restore Safety revised. Mounted problems with some NV sorts.
– Core
EMIDB up to date
Trace/Error give an explanation for module up to date
MT6758 fortify underneath take a look at MT6765 fortify underneath take a look at
– FW reader
MT6771 supported
New sorts of firmwares supported Scatter advent optimized
– SP Release
Revised free up fortify for some fashions
Information: MT6739/MT6763/MT6771 IS NOT supported YET!
– New fashions integrated Restricted Oppo fortify (F7/A3)
Restricted Vivo fortify And diffirent different fashions
Every other elementary “generic” protected units fortify optimized
Identified problems/warnings/information:
1. [NAND on MT6570] v1712, v1736 loader applications SHOULD NOT BE USED because of those applications have ftl/ecc mistakes!
In consequence you are going to give learn/write FW mistakes and relaxation issues in any respect.
Suggest use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Learn and Write
2. [NAND on MT6570] In some instances “caught on emblem” units can also be fastened most effective by way of FFU (complete flash) structure!
3. [MEMORY TOOL] Walls state on MEMORY TOOL shall be empty in MT6570 NAND telephones, it’s customary behaviour and cannot be fastened.
Learn-Write information, which you wish to have, forget about “EMPTY” states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND units! Consequence – caught after device/userdata partition flashing
5. FileSystem flashing on some SBC-enabled units ( with the exception of SYSTEM/CACHE/USER ) would possibly fail! Resolution – exclude them from flashing record.
6. Affordable MT6739 units require BATTERY REMOVING after EVERY operation most often!
7. Meizu fortify is proscribed via Preloader Stage ( No BROM SLA ) – you will have to UNTICK “PMT Replace” and “PRELOADER” partition from flashing record!
8. [NAND on MT6570] In some instances software MAY DEAD after flashing! You should definitely have TESTED firmware model!
When you’ve got obtain FW from web/different supply – be certain that it preloader CONTAIN 3 EMI file! Preloader jc45btlc with 2 data KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
Preloader information proven now all the way through FW load.
Credit :
kamal_singla – trying out and helpful recordsdata contribution
– Tool put in to new folder /CM2MT2/ and designed to fortify new fashions
– Good-Card firmware v0136 is Good enough to make use of this model
– DO NOT uninstall earlier model 1.58 ! If you’re looking to attach telephone with new device and notice a message like LEGACY MTK you can use model 1.58 for this software !
Obtain hyperlink ^(

Add record to Give a boost to
Infinity-Field 13 years (2005 – 2018) updates and fortify as no one else – Information