ZH&K Pioneer 18 firmware/stock rom to unbrick your phone

Hello,

This firmware is ZH&Ok Pioneer 18. This phone has a nand chip.

Tzc0mY8%2B-%2BImgur ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root



All footage underneath are simply an instance. 


You’ll repair the next factor in your phone:
1. Bootloop
2. Broken Machine UI
3. TP Improve best
4. Useless phone however it’s detected in laptop
5. Take away Gmail Account / Password / Trend Lock (Selection Approach)
6. Privateness Coverage Password Lock up
7. Monkey Virus/Malware 


“DOWNLOAD THESE FILES”
Firmware Right here –>ZH&Ok Pioneer 18 Obtain Hyperlink
VCOM Motive force –>VCOM Guide

Selection Motive force –> AutoInstaller
SPFlashTool – Newest Model


“Use WinRar or 7zip to extract the firmware”
“Extract the recordsdata to your desired folder”
“If you happen to come across error in flashtool, use other model of it.”
“Uncheck obtain supervisor in Datafilehost”


“I recommend to use 32bit Home windows OS for compatibility of the motive force”

“You’ll additionally use 64bit model, simply disable motive force signing or motive force signature earlier than putting in the motive force.”



Putting in Motive force with AutoInstaller


First check out the Selection Motive force, which is the AutoInstaller. Simply open the set up.exe then it’ll routinely set up the motive force. To completely take a look at if the motive force is as it should be put in in your laptop. 

Apply those steps:

  1. Flip off your phone (all the time powered off is a should)
  2. Press and hang quantity up or down, or you’ll easy press the two button.
  3. Insert your USB cable with out freeing the VOLUME button(s).
  4. In your laptop, it should come across your phone and it’ll set up the MTK Preloader or Mediatek USB VCOM motive force.
  5. Repeat 1 to 4 if it does no longer come across your phone.
  6. If MTK Preloader/Mediatek USB VCOM Motive force is put in you might be excellent to pass in flashing your phone ^_^


Reference Video the usage of Motive force Auto Installer (watch in HD)


Putting in Manually the usage of VCOM Motive force


When putting in it manually your phone should be became off, then attach it to your laptop/computer whilst urgent VOLUME UP or VOLUME DOWN. This will come across and search for the motive force.

next ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root

 1. That is the primary time that you’re going to attach your phone and it’ll seek for the proper motive force.

driver ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root
2. Test come with this location … … and click on on browse. Search for USB VCOM Motive force and Click on on 2K_XP_COM folder in case you are the usage of Home windows XP or Win7 for Home windows 7 after which press OK when you find yourself accomplished selecting the proper folder for the motive force.

driver2dacom ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root

3. If the motive force is effectively put in MediaTek DA USB VCOM will seem within the New Wizard.


Video Putting in VCOM Motive force (please watch in HD)





“Your Phone should be became off when you find yourself able to attach and flash your phone”


Flashing

1. Release FlashTool (flash_tool.exe)
2. In Flashtool, Click on on Scatter-Loading, and cargo your scatter record. (see instance underneath)
ScatterLoading1 ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root

Reference Video The usage of FlashTool model 5.xxx (watch in HD)




 3. After you load the record, FILL CUSTPACK, MOBILE_INFO, and different record if best to be had within the firmware. Forget about if no longer to be had. UNCHECK PRELOADER  best (By no means flash preloader), If you can’t continue  in flashing with out PRELOADER come with PRELOADER. Continue at your personal possibility, press Press Obtain to Flash your Phone.


ScatterDoneLoadingFlash ZH&K Pioneer 18 firmware/stock rom to unbrick your phone Root
4. After you press Obtain Apply those steps

  • Flip off your phone (all the time powered off is a should)
  • Press and HOLD quantity UP or Down or you’ll merely press it concurrently
  • Insert your USB cable with out freeing the VOLUME button(s).
  • Stay on repeating till Flashtool detected your phone.

5. If effectively detected simply wait till the development bar reaches 100%. If your phone didn’t routinely activate after flashing, take away battery and USB cable. And put again your battery then activate your tool.


“Laborious reset your phone after flashing”


Some workarounds:
If you happen to come across PMT_Changed error here’s what you do:
In Newest model of Flashtool

  1. PMT_CHANGED error happen when firmware isn’t suitable with your phone. Now and again your phone has a special board model. You will have to take a look at it too, if your firmware is suitable with your phone. 
  2. Check out Firmware improve
  3. Check out other model of flashtool
  4. Check out to set Structure All + Obtain
  5. Or check out Guide Structure first then Obtain.


If you happen to come across Privateness Coverage Password:


  1. Open flash_tool.exe
  2. Load the scatter record
  3. Goto Structure Tab
  4. Click on on Structure apart from bootloader
  5. Press Play/Get started Icon
  6. Then take away battery
  7. Insert the battery once more
  8. Insert the USB cable (you will have to listen a beep on your laptop, and it will have to continue in formatting.)
  9. After accomplished formatting continue in Flashing.
  10. Goto Obtain tab (I suppose that you simply loaded the scatter record already)
  11. Uncheck PRELOADER (this is essential)
  12. Press Obtain
  13. Then take away battery
  14. Insert Battery once more
  15. Insert the USB cable (you will have to listen a beep on your laptop, and it will have to continue in flashing or downloading the firmware in your phone.)
  16. Energy ON the phone after flashing.
  17. Repair your IMEI.

For Invalid IMEI (Does no longer paintings in MT6571 SoC):


  1. Root your phone by way of vRoot/iRoot/Kingoroot or your most popular approach in rooting you tool. Your phone should be rooted first.
  2. Obtain MTKDroidsTool model 2.4.8 and model 2.5.3
  3. Allow your USB debugging in Developer Choice (you additionally want this in rooting your phone by way of PC)
  4. Ok in your PC — Open MTKDroidstool model 2.4.8 (Mtkdroidstool.exe) first. Just remember to attached your phone already.
  5. Nonetheless in Mtkdroidstool — Click on ROOT
  6. In your phone — A pop up discussion will seem, simply grant or permit it.
  7. In your PC — If root shell is granted/allowed, Click on in IMEI/NVRAM tab. Whether it is grayed out that is the time whilst you open the MTKDroidsTool model 2.5.3.
  8. Input your unique IMEI
  9. Click on Change
  10. Reboot your phone



FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone should be rooted first)



1. Remember to have MTKDROIDSTOOL model 2.4.8 or model 2.5.3 (you’ll seek it in google)
2.  In MTKDroidstool (I suppose you release the software) — Click on in Root. 
3. In your tool — http://d-h.st/miIbAfter you press Root, you wish to have to authorize it. A pop up message will seem. Click on Permit/Authorize will depend on your root utility.
4. In MTKDroidsTool — Click on in IMEI/NVRAM, then click on in RESTORE.
5. Then search for the folder the place you extracted the NVRAM recordsdata.
6. Test if the Baseband is fastened. And if the IMEI is absolutely restored.
7. If Baseband remains to be Unknown and IMEI is invalid. Then you wish to have to exhausting reset first your phone.
8. After exhausting reset your baseband will have to be fastened already. (base on my enjoy)
9. If your baseband is fastened every so often the IMEI remains to be invalid. So you wish to have to repair the IMEI.
10.  To revive IMEI practice Step 1-4, however you will have to no longer repair. You will have to fill the IMEI then click on REPLACE. Then reboot your phone.  VOILA! I am hoping the phone is absolutely operating 🙂

I am hoping this educational mean you can. Please drop a remark if one thing isn’t transparent to you.

Examined through: ME